123 HP Setup officejet 250

123 HP Setup officejet 250, Instant Support call 1 866 309 6188

123 HP Setup officejet 250

FEATURES

  • Relaxed portable printing
  • Dynamic feature & consistency
  • Get remarkable performance with debauched mobile print speeds and cartridges that let you print more pages than other in-class cartridges.
  • Personalized power options let you charge in the car, office, and home. Quiet performance decreases disruptions

LIST OF PRINTER ISSUES

  • The printer is offline Windows and Mac.
  • Turning on web services.
  • Paper mismatch error for Windows & Mac
  • Ink cartridge errors
  • Carriage jam
  • Paper jam message
  • Find your wireless WEP,WPA for windows & Mac
  • Mobile printer setup fails(Android).
  • Printer not found during network driver setup for windows &Mac
  • Updating firmware on the printer.

FIRST TIME 123.HP.Com Oj250 PRINTER SETUP

To install a printer for the first time, eliminate the printer and all packing materials from the box, setup the battery, link the power cable, set the control panel preferences, mount paper, and then setup the ink cartridges. After your printer is setup, install the latest print driver.

STEP 1 : ELIMINATE THE PRINTER FROM THE BOX

  • Eliminate the 123.HP.Com oj250 printer from the box.
  • Eliminate all tape and packing materials from the exterior of the printer.
  • Raise the top cover, and then eliminate tape from the inside of the printer.
  • Expose the ink cartridge access door, and then eliminate all tape and packing material from the exterior of the printer.
  • Reuse the stuffing materials.

STEP 2 : ENCLOSE THE BATTERY

  • Move the printer in such a way that the back faces you.
  • Shove the battery cover bolt to the right, and then tug the battery cover near you to eliminate it.
  • Unpack the battery.
  • Slide the battery into its slot, and then apply pressure to the left side of the battery until it locks into place.
  • Slide the battery cover into its slot, and then make sure the left side of the cover clicks into place.

STEP 3 : LINK THE POWER CORD AND SET YOUR PREFERENCES

  • Link the power cord to the back of the printer, and then plug the other end of the power cord into the socket.
  • Switch on the 123.HP.Com oj250 printer.
  • On the control panel of the printer, move the arrow buttons to choose your preferred language and country/region, and then click OK.

STEP 4 : MOUNT PAPER INTO THE INPUT TRAY

  • Expose the top cover, and then raise the control panel.
  • Glide the two paper width guides out as far-off as possible.
  • Mount 50 sheets of plain paper, and then glide the paper width guides.

STEP 5 : INSTALL THE INK CARTRIDGES

  • Expose the ink cartridge access door.
  • Eliminate the ink cartridge from its package. Be cautious to only hold the black plastic on the ink cartridge.
  • Eliminate the plastic tape from the ink cartridge.
  • Attach the ink cartridge into its place, and then move the ink cartridge till it locks into its place.
  • Setup the color ink cartridge on the left and the black ink cartridge on the right respectively.
  • Shut the ink cartridge access door.
  • After mounting the ink cartridges, the printer mechanically prints an alignment page. Lining up the ink cartridges is essential to attain the best print feature.
  • If an alignment page does not print, you can manually select and print an alignment page.
  • Select the setup from the arrow button and press ok.
  • Move the down arrow to choose Tools, and then tap OK.
  • Move the down arrow to choose Align Printer, and then select OK.
  • Aligning exhibits on the control panel.
  • The printer might make a beep sound, and then the printer prints the required page.
  • Your HP Officejet 250 printer hardware is now installed and you can download the printing software.
  • Do not try to link the printer to a computer until initiated to do so in the printing software.
  • Download the latest version of the printing software from our website.

USB PRINTER SETUP (WINDOWS)

STEP 1 : ARRANGE FOR THE 123.HP.COM OJ250 PRINTER SETUP

Check the following necessities and things before you start:

  • The HP oj250 printer is switched on.
  • Attain a USB cable less than 3 m (9 feet 10 in) in length.
  • There should be an accessible USB port on your computer: If you link to a USB hub or docking station, the printer might not get enough power to properly activate.
  • If you have linked the USB cable to the computer before mounting the HP driver, continue with these steps to eliminate the printer from the mounted devices to confirm a successful setup. Otherwise, go to the next step to download the driver.
  • Separate the printer USB cable from the computer. Do not relink the cable until interrupted during the driver installation step.
  • Look in Windows for ‘devices’, and then tap the Devices and Printers control panel setting in the results.
  • Select Remove device. If numerous icons exist for the printer, eliminate them all.
  • Shut the Devices and Printers window, and then go to the next step.

STEP 2 : INSTALL THE DRIVER AND SETUP THE CONNECTION

  • Go to our website, type your printer model, and monitor the onscreen instructions to setup your driver. Liable to your printer model, the guided driver setting up app HP Easy Start might install.
  • Suppose a driver or HP Easy Start downloads, monitor the on-screen instructions to expose the download file to begin the setup. When interrupted to select a connection type, choose USB. If the setup is successful need not complete the leftover steps.
  • Suppose the download fails or your printer is not listed on your website, go with these steps to mount a driver from our website.,
  • Type your printer model, if interrupted, and then check the operating system version is correct.
  • When interrupted by the installer to select a 123.HP.Com oj250 printer connection option, choose USB to continue with and finish the setup.
  • Attempt to print, scan, or fax, liable to your printer functionality.

USB PRINTER SETUP (MAC)

STEP 1 : ARRANGE FOR THE PRINTER SETUP

Monitor the following necessities and items before you start:

  • Switch on the 123.HP.Com oj250 printer.
  • Attain a USB cable less than 3 m (9 ft 10 in) in length.
  • There is an obtainable USB port on your computer: If you link over a USB hub or docking station, the printer may not receive enough power to accurately operate.
  • Detach the printer USB cable from the computer. Do not relink the cable until interrupted during the driver installation step.

STEP 2 : MOUNT THE DRIVER AND FIX UP THE CONNECTION

  • Go to our website type your printer model, and then select start. Liable to your printer and operating system version, the guided driver installation app HP Easy Start downloads, or you are readdressed to the HP Software and Driver Downloads page to download the full feature driver.
  • Go to our website, type your printer model, if interrupted, and then check the operating system version is right.
  • When interrupted by the installer to select a printer connection option, choose USB.
  • On the Install screen, ensure HP Scan or HP Easy Scan is nominated if your printer has a scanner to support full scan functionality.
  • When interrupted by the installer, select Add Printer to make a print queue on the Mac.
  • The Add window appears.
  • Select the name of your printer, choose the Use or Print Using menu, tap the name of your 123.HP.Com oj250 printer in the pop-up menu, and then select Add.
  • Arrive to the HP installer to finish the installation.
  • Attempt to print, scan, or fax, liable to your printer functionality.
123.hp.com/ Top OJ Related Models