HP AMP 110 Printer

The HP AMP 110 is compatible with HP ePrint, HP Instant Ink and Print Apps. You can wirelessly print, scan, and manage your HP AMP 110 from your mobile device with HP Smart app. It has a recommended monthly volume of 500 to 1000 pages. It uses HP Thermal Inkjet technology.

The control panel consists of a Power button, Cancel button, Wireless button and light, control panel display, Information button and light, Resume button and light. The control panel shows Wireless, HP Instant Ink, Wi-Fi Direct, Error number, Paper Error, Error, and ink level icon.

123 HP AMP 110 Technical Specifications

  1. It is compatible with HP 65 and HP 65 XL replacement cartridges.
  2. It is a dynamic security enabled printer that is intended fro use only with cartridges that possess original HP electronic circuitry.
  3. It supports HP ePrint, Apple AirPrint, Wireless Direct Printing, WiFi Direct, HP Smart App.
  4. Plain paper, Glossy Brochure Papers, Photo Papers, Envelopes, and other specialty inkjet papers are the supported media type.
  5. It has a print speed of up to 7.8 ppm and 5.5 ppm for black and color by ISO standards.
  6. It has a print speed of up to 18.5 ppm and 5.5 ppm for black and color in draft mode.
  7. It weighs 5.73 lb and has a dimensions of 15.94 X 6.96 X 5.70 in.
HP AMP 110 Printer

123 HP AMP 110 Printer Setup installation

  • Unbox the AMP 110. Take out the plastic wrap from the printer. Fix the power cord to the back of the printer, and then fix the other end of the power cord into an electrical outlet.
  • Power up the printer. Draw out the ink cartridge access door. The carriage moves to the middle of printer.
  • Once the carriage is quiet and inactive, proceed further. Unpack the new cartridge. Hold the cartridge only by the black plastic region. Peel off the plastic tape from the ink cartridge.
  • Hold the ink cartridge by its sides with the contacts pointing toward the printer, insert the HP AMP 110 ink cartridge into its slot, and then gently push the ink cartridge until it locks into position.
  • Repeat this procedure for the other ink cartridges. Shut the ink cartridge access door.
  • Lift the input tray and the input tray extender. Force the input tray shield back and hold it, glide the paper width guide to its extreme position on the left and then let go of the input tray shield.
  • Place a maximum of up to sixty sheets of blank white paper into the input tray, and then push the stack of paper down until it cannot go further.
  • Force the input tray shield back and hold it, glide the paper width guide to the right until it halts at the edge of the paper, and then let go of the input shield.
  • Push out the output tray and the output tray extender, and then raise the paper catch.
  • Compete the setup by downloading and installing the full feature printer driver and software for the HP AMP 110.

123 HP AMP 110 Print Document support

  • The user guide or manual is a document specially prepared to answer the queries of the customer. It offers clear instructions without ambiguity so that the users can operate the device by themselves. It provides illustrated description of the various printer parts and their functions.
  • The HP AMP user guide givers you pertinent information on getting started, printing, using the Bluetooth audio system, using Web Services, Scan using HP Smart, managing cartridges, connecting your printer to wired and wireless networks.
  • It offers information on errors and issues such as: jams and paper-feed issues, cartridge issues, printing issues, network and connection issues, getting help from HP Smart app, printer hardware problems, Control panel error codes and status and Bluetooth audio system issues.

123 HP AMP 110 Wireless Setup support

Connecting to your printer over a wireless network saves you the hassle of cables messing up your work space. Follow the instructions to connect to your HP AMP 110 through a wireless network.

AMP 110 – Windows Setup

Prior to installing the printer software and connecting to your wireless network, examine the requirements, switch on the computer and the router, and set up your printer.

  1. To utilize your 123 HP AMP 110 on a wireless network you require the following items:
    • A computer connected to the wireless network you wish to connect your printer to
    • Internet Access: It is recommended broadband Internet access such as Cable or DSL for sofware downloads, utilizing Web Services, and receiving updates.
  2. Ensure that your router and computer are switched on, and that the computer is connected to the same wireless network to which you wish to connect.
  3. Set up your printer, place paper into the input tray, and load the ink cartridges.
  4. Switch on the printer and place it in close proximity to the computer and within the scope of the router’s range during the wireless setup procedure.
  5. Detach any USB cables from the printer, if required.
  6. Download and install the full feature printer driver and software to complete the HP amp 110 printer setup.
  7. Open HP Easy Start and when asked to choose your printer, select My Printer is not shown.
  8. Choose Continue, and then choose Wireless Network (if applicable). Choose Continue, and then follow the on-screen instructions to set up your printer on a wireless network.
AMP 110 – Mac Setup

To utilize your HP AMP 110 on a wireless network you require the following items:
a)A computer connected to the wireless network you wish to connect your printer.
b)Internet Access: It is recommended broadband Internet access such as Cable or DSL for software downloads, utilizing Web Services, and receiving updates.

  1. Ensure that your router and computer are switched on, and that the computer is connected to the same wireless network to which you wish to connect.
  2. Set up your printer, place paper into the input tray, and load the ink cartridges.
  3. Switch on the printer and place it in close proximity to the computer and within the scope of the router’s range during the wireless setup procedure.
  4. Detach any USB cables from the printer, if required.
  5. From the printer’s control panel, ensure that the wireless light is blinking and the Power button light is bright. If the light is not shining, press the button to wake the printer from sleep mode.
  6. In case the wireless light is not blinking, press and hold the Power button for three seconds until all of the buttons light up, and then tap and hold the wireless button and the cancel button simultaneously for 3 seconds.
  7. Immediately proceed to the next step to install the software. You have around 120 minutes to finish the software setup using the HP auto wireless connect feature.
  8. Download and install the full feature printer driver and software to complete the printer setup.
  9. Open HP Easy Start and choose Set up My HP Product. Accept the terms and conditions. On the prepare screen, choose continue.
  10. From the printer’s control panel, make sure the power button light is bright. If not, wake the printer from sleep mode.
  11. The Connect screen mentions your 123 hp amp 110 printer series and serial number as [Ready to connect]. If the printer is not listed, repeat the procedure to restore the default wireless settings.
  12. On the connect screen choose the printer, and then choose Continue.
  13. Once the installation is over, examine your network configuration, the Connect screen shows your printer and your wireless network SSID with a Join button between them. Select Join, if the network name is correct. If not, choose the correct name and then choose Join.
  14. After choosing Join, the computer is temporarily untethered from the wireless network while the connection is set up.
  15. When HP Easy Start requests access the chosen wireless network keychain on the Mac, choose Allow.
  16. After the wireless network password is approved, HP Easy Start sets up the printer and connects it to the network. When the check mark appears, choose Continue.
  17. Follow the on-screen prompts. Choose HP Essential software and any additional software your require and choose Install. After the installation is over, choose Continue. Follow the on-screen instructions until the Add and Verify your Device appears.
  18. Choose Add Device. Choose Print Test Page to ensure that the printer was set up correctly. After the test page print Choose Continue.
  19. If you have any queries, speak to our technical support team on the toll-free number.

123.hp.com/amp 110 – Troubleshooting Support

Paper Jams are a common kind of error in printer. Follow the instructions listed below to complete the troubleshoot the issue. Always use both hands and use a torch light to see examine the region where the jam has occurred.

Paper Jam in Input Tray: Take out all the paper from the input tray, including both loose and jammed paper. Lift and hold the input tray shield, utilize a flashlight to examine any jammed paper or foreign objects in the paper path. Push the cancel button. The HP AMP 110 printer attempts to clear the jam by itself.

Paper Jam in Output Tray: Take out all the paper from the output tray, including both loose and jammed paper. Examine the tray for any jammed paper or foreign objects in the output tray area, and then remove any jammed paper or foreign objects you find.

Clear Jam in Cartridge Access Area: Press the cancel switch to try to clear the jam by itself. If this does not work, finish the following steps to clear the jam manually. Draw open the cartridge access door. Once the carriage is quiet and inactive, push the power switch to power off the printer. Disconnect the power cord and other cables from the printer.

Examine the cartridge access area with a torchlight and take out any jammed paper or foreign objects you spot. If the carriage is in the middle of the window, move it to the right, and then take out any paper or objects blocking the carriage path. Shut the cartridge access door. Plug the power cord and any other cables to the back of the printer, and then push the Power button to switch off the 123.hp.com/amp 110 printer.